My Blog » STi-R Remote
0 Comments- Add comment |
Back to Home Written on 06-Nov-2008 by radardetectors4you
Click here for your STi-R Remote Radar Detector
Specifications:
Operating Bands
X-band: 10.525 GHz ± 25 MHz
K-band: 24.150 GHz ± 100 MHz
KaSW (Super Wide): 34.700 GHz ± 1300 MHz
Laser: 904nm, 33MHz bandwidth
When KaSW is off, each
Ka segment can be turned on or off
Ka1 (33.392 - 33.704) ON or OFF
Ka2 (33.704 - 33.896) ON or OFF
Ka3 (33.886 - 34.198) ON or OFF
Ka4 (34.184 - 34.592) ON or OFF
Ka5 (34.592 - 34.808) ON or OFF
Ka6 (34.806 - 35.166) ON or OFF
Ka7 (34.143 - 35.383) ON or OFF
Ka8 (35.378 - 35.618) ON or OFF
Ka9 (35.595 - 35.835) ON or OFF
Ka10 (35.830 - 35.998) ON or OFF
Radar Receiver/Detector Type
Dual LNA Microwave Receiver
Superheterodyne, Varactor Tuned VCO
Scanning Frequency Discriminator
Digital Signal Processing (DSP)
Laser Detection
Quantum Limited Video Receiver
5 Optical Laser Sensors
Display Type
280 LED Alphanumeric
Bar Graph, Threat Display™, Tech Display™
Automatic plus 4 levels of fixed brightness including full Dark
Programmable Features
Display
Power-On Indication
Voice Alerts
Power-On Sequence
Signal Strength Meter
AutoMute
Brightness
Bands
Sensitivity Control
Highway
AutoScan™
City / City NoX
Additional Patented Technology
Auto Calibration Circuitry
Mute / AutoMute / SmartMute
TotalShield™ Technology
Dimensions (Inches)
Display: 1.950 x 0.666 x 0.627
Control: 1.950 x 0.425 x 0.650
Radar Receiver: 3.680 x 4.120 x 1.200
Speaker: 2.25 x 2.116 x 2.250
Power Requirement
12VDC, Negative Ground
Completely installed, complete protection. The Sti-R Remote radar detector comes fully equipped to detect all US radar and laser bands. Increased sensitivity on the two front mounted detector antennas reduces false alerts while extending the range of true threat detection.
Undetectable by any Detector-Detectors with our Exclusive TotalShield technology. Redesigned controls are smaller and easier to install. Includes 1 receiver that measures X/K/Ka bands, interface module, amplified speaker, in-dash trim bezel, remote mute and volume and more. Requires 12VDC negative ground power source.
Professional installation of this Radar Detector is recommended.